The Original Killer Brass Claw -Tremolo Spring Claw -Best-Seller -Great Upgrade

Description

FREE SHIPPING IN US ON US!
EASY PEASEY INSTALL!!
KILLER GUITARS' #1 SELLING ITEM!  A MUST-HAVE!
Increase Resonance
Enhance Tone
Increases Sustain
Improves Tuning Stability with heavy vibrato use
No mods necessary for installation
Will not fit Mann Made Trem or PRS (see our other listings for this claw)
1.35" (34.3mm) mounting space
Includes mounting hardware
Comment from a pleased client:  Thanks Scott!
2012metalworksguitar:
I recently upgraded my 1994 Ibanez JEM7V with your Killer Brass Claw and love it. Tuning stability seems much better now, as I use the Whammy Bar frequently. The quality is over the top, screw hole/spring alignment dead on! Great
f you look around, there have been a lot of knockoffs out there of the Killer Claw.  Some cheaper from overseas, some more expensive and have locking mechanisms etc.  None of them compare to the KGC Killer Brass Claw.  The overseas ones are made from a cheap Asian alloy and show all the machining marks - no finishing!  The locking claws are just a big clunky piece...rattletraps!  None have an easy ground install like the KGC claw does either!
THE Killer Claw...
BEST MATERIAL
SIMPLEST INSTALL
MADE 100% in USA (support small business)
BEST DESIGN - finger undercut, simple ground lug
FINISHED COMPLETELY - no
sharp edges, no machine tool markings
PROVEN RELIABILITY AND TONE UPGRADE -
I've been making these for over a decade!  Never had one break or come back but we offer a
LIFETIME GUARANTEE on all our parts.  Full replacement or repair at no charge for any issues.
THE Killer Brass Claw - the Original and only solid-milled Brass Tremolo Claw!
There are now many Chinese and other manufacturers making cheap imitations of our parts. They do not compare in material, design or finish - they are just bad imitations at a cheap price. Don't fall for it - you get what you pay for! This the the ORIGINAL Killer Claw design from Killer Guitar Components - Made 100% in USA
Don't fall for the scams out there trying to sell you brass claws that are made from sheet and just bent - they will not hold up - and they simply won't give you the tonal upgrade that the Killer Claw will.  There are also now cheap milled Chinese brass claws that they didn't even bother to mill the claw fingers at an angle - one of the most difficult parts of machining this part!  Your springs will slip right off - promise.  Don't fall for it - get the Original Killer Claw!
1 3/8" Mounting Hole Spacing
This claw will fit most any tremolo system with a spring claw - the exception being PRS and G&L models as they have different hole spacing.  If you want a claw for one of these guitars, please Contact us here at KGC.  Strat, Floyd, Ibanez, etc, etc - all a direct fit.
Package includes:
(1) Killer Brass Claw
(1) No Solder ground attachment lug - crimp and shrink
(2) Brass Mounting Screws (1-1/2" long)
(2) Stainless Steel Mounting Screws (1-3/4" long)
This claw is milled from a solid piece of brass. Those other brass claws you will find out there are all bent. Bending brass (or any metal) reduces its integrity and given how soft of a metal brass is - it will warp or bend from its original shape if there is not enough strength to hold that tension from the springs. With our new design, there is no worry when it comes to strength and integrity. On top of being extra thick for ultimate stability, this claw is made from KGC's secret alloy of musical brass, so it will increase sustain and enhance tone more than any other claw available! Try one today! Believe it or not, the difference is notable on ANY guitar.  If you don't feel and hear any difference, we will take it back for a full refund - which has yet to happen  :-)
Over time, many artists have discovered the amazing quality, craftsmanship and benefits to using KGC gear.  Here are a few of our current Killer artists...
Zoltan Bathory (Five Finger Death Punch)
Steve Stevens (Billy Idol, Michael Jackson)
Phredley Brown (Bruno Mars)
Kenny Wayne Shepherd
Michael Wilton (Queensryche)
Mick Thomson (Slipknot)
Greg Karas (Andy Grammer)
Crosby, Stills & Nash
Carl Verheyen (Supertramp)
Terence Reis (The Straits)
Patrick Greenaway (The Weeknd)
Clint May (Cole Swindell)
Joel Hutsell (Cole Swindell)
Bart Walker (Royal Southern Brotherhood, Double Trouble)
Tyrone Vaughan (Royal Southern Brotherhood)
Joe Nadeau (Kenny Wayne Shepherd Band, Joe Nadeau Band)
Mark Claytor
Chris Bickley (Christine Ohlman (Beehive Queen), Saturday Night Live)
Warren Robert
Tony Black
Robbie Hill (The Blue 62's)
Jay Harris (Soul Rebel Project)
Kevin Kessinger
Scott A. Martin (The Godz)
William Briggs (Barry & The Remains)
Kevin Russell (707, Cream of Clapton)
Martin Stewart (Gilmour's Breakfast)
Jeremy Colas (Prominent Nashville Artist and Tech)
George Politis
Tony Pasko
Matt Teichmann
Shane Fontayne (Springsteen, Graham Nash)
BE CAREFUL!!!
Those other guys are offering "Brass Claw Mounting Screws" - yes, they are brass and are the correct length - But they are the wrong type of screw! You are almost guaranteed to have either issues with hangup on the claw or issues with the screw stripping out. Claw screws should be OVAL head - not Flat Head! It does matter. Unfortunately, 1-3/4" Oval head brass screws in this size do not exist anywhere on earth - so, we offer 1-1/2" brass and 1-3/4" Stainless - both are great options but the 1-1/2" may be too short for some setups. So, there ya go. Be careful what you buy from those other "Tone" guys - they aren't doing their research. They simply pay some shop to make knockoff parts in brass, titanium etc - you could do that!!! Here at KGC we are our own custom shop. We make all KGC parts right here in our own shop in Gloucester, MA.
The KILLER CLAW was featured in Vintage Guitar Magazine as a product Spotlight! ..and got an "A" rating!
The Killer Claw is a revolutionary upgrade replacement for the bent sheet metal claw that comes standard in any tremolo-equipped guitar. Precision machined (not bent) from a solid billet of KGC’s musical brass alloy, this new design adds a feeling of balance and stability to your tremolo. The improvements in resonance and sustain are notable. The Killer Claw is a universal replacement for any tremolo claw. Heat-shrink lug included for easy ground wire attachment. Available in Brass, Nickel-Plated Brass and Gold-Plated Brass. Made in U.S.A. A++
Product!!
Made in USA 100%
THE Killer Brass Claw - the Original and only solid-milled Brass Tremolo Claw! There are now many Chinese and other manufacturers making cheap imitations of our parts. They do not compare in material, design or finish - they are just bad imitations at a cheap price. Don't fall for it - you get what you pay for! This the the ORIGINAL Killer Claw design from Killer Guitar Components - Made 100% in USA
Don't fall for the scams out there trying to sell you brass claws that are made from sheet and just bent - they will not hold up - and they simply won't give you the tonal upgrade that the Killer Claw will. There are also now cheap milled Chinese brass claws that they didn't even bother to mill the claw fingers at an angle - one of the most difficult parts of machining this part! Your springs will slip right off - promise. Don't fall for it - get the Original Killer Claw!
READ ON FOR MORE INFO:
The theory is that  in order to increase sustain and get the true tone of the wood in the body of your guitar you need the best "string-bridge-body" connection possible. This devise increases that connection and is precision machined from a solid billet of brass one at a time,
NOT STAMPED OR MACHINED THEN BENT
by the thousands overseas with inferior sheet stock as is offered by other manufacturers.  Bending brass reduces its integrity.
With our design, there is no worry when it comes to strength and integrity.  On top of being extra thick for ultimate stability, this claw is made from KGC's chosen alloy of what we have determined as
"musical"
brass, so it
will increase sustain
and
enhance tone
more than any other claw available!  Please try one today, it will do exactly as we say or money back --really!
The Killer Claw includes a solder-free, heat shrink lug !
No need for a soldering gun!
Just put the wire into the connector, crimp and shrink the tubing with a lighter or heat gun.  Easy as can be!
1 3/8" Mounting Hole Spacing - Fits any tremolo with just a few exceptions -   Directly replaces any standard aftermarket such as Ibanez®, Jackson®, ESP®, Schecter®, Gotoh/Wilkinson®, Floyd Rose® etc---
Includes (2) Brass Phillips oval head mounting Screws 1 1/2" long - these may be too short for some players' setup, so we are now including (2) 1 3/4" Stainless Screws as well.
BE CAREFUL!!!  Those other guys are offering "Brass Claw Mounting Screws" - yes, they are brass and are the correct length - But they are the wrong type of screw!  You are almost guaranteed to have either issues with hangup on the claw or issues with the screw stripping out.  Claw screws should be OVAL head - not Flat Head!  It does matter.  Unfortunately, 1-3/4" Oval head brass screws in this size do not exist anywhere on earth - so, we offer 1-1/2" brass and 1-3/4" Stainless - both are great options but the 1-1/2" may be too short for some setups.  So, there ya go.  Be careful what you buy from those other "Tone" guys - they aren't doing their research.  They simply pay some shop to make knockoff parts in brass, titanium etc - you could do that!!!  Here at KGC we are our own custom shop. We make all KGC parts right here in our own shop in Gloucester, MA.
Some of the KGC artists currently using the "Killer Brass Claw"
ZOLTAN BATHORY
--- "Five Finger Death Punch"-the first red Dean guitar with his initials on our block is his signature.
PHREDLEY BROWN
--- "Bruno Mars" - Every tremolo-equipped guitar - Strats, Floyd Roses, etc
JOHN OATES
--- "Hall & Oates" - Also uses Brass Keyhole Saddles, Brass block and more tremolo parts
TERRENCE REIS
---"Dire Straits" -  the red Strat is his
STEVE STEVENS
---"Billy Idol", Michael Jackson and on and on.....
BART WALKER
--"Hank WIlliams Jr"
CARL VERHEYEN -
"Supertramp"
...and many more
The KILLER CLAW was featured in Vintage Guitar Magazine as a product Spotlight!  ..and got an "A" rating!
The Killer Claw is a revolutionary upgrade replacement for the bent sheet metal claw that comes standard in any tremolo-equipped guitar.
Precision machined (not bent) from a solid billet of KGC’s musical brass alloy, this new design adds a feeling of balance and stability to your tremolo.
The improvements in resonance and sustain are notable.
The Killer Claw is a universal replacement for any tremolo claw.
Heat-shrink lug included for easy ground wire attachment.
Available in Brass, Nickel-Plated Brass and Gold-Plated Brass.
Made in U.S.A. A++
INTERNATIONAL SHIPPING
"FIRST CLASS" FOR .95 WITH NO TRACKING BUT BUYER MUST ASSUME ALL RESPONSIBILITY FOR DELIVERY